RU | EN
Las Vegas NV: +1 702 900 1133
Export : +1 954 300 2244
Contact / Locate a Distributor
 
PC-2

Plastic Cement is a solvent cutback, fibrated, asphalt mastic that forms a tough, flexible, water resistant coating.

Perminator Tape carton

PERMINATOR TAPE is a self-adhesive tape for use in sealing vapor barrier seams and attachment to footings, protrusions, etc. It is offered in 4❠(10 cm) widths and roll lengths of 180♠(55 m)/roll. It is packaged twelve rolls per carton. Coverage: One box of tape will adhere approximately 10 rolls of PERMINATOR.

PMPC

PREMOULDED MEMBRANE VAPOR SEAL WITH PLASMATIC CORE (PMPC) is a patented (#US 7,179,761) seven-ply, weather-coated, permanently bonded, semi-flexible vaporproofing/waterproofing membrane. It is composed of an exclusive plasmatic core suspended mid-point between two layers of a homogeneous, bituminous material, and then sealed under heat and pressure between liners of asphalt-impregnated felt and a glass-mat liner. An asphalt weather coat is applied to the glass-mat liner and covered with a polyethylene anti-stick sheet.

RWP001 PERMINATOR®10

PERMINATOR underslab vapor barrier/retarder is a new generation of polyolefin-based resin/chemical technology. PERMINATOR provides the vapor barrier industry with a highly effective, economical choice for helping to reduce the penetration of moisture and water vapor through the slab into the structure, thereby helping to reduce fungus, mildew, and mold growth. PERMINATOR also helps reduce radon gas from entering the structure.

RWP001 PERMINATOR®15

PERMINATOR underslab vapor barrier/retarder is a new generation of polyolefin-based resin/chemical technology. PERMINATOR provides the vapor barrier industry with a highly effective, economical choice for helping to reduce the penetration of moisture and water vapor through the slab into the structure, thereby helping to reduce fungus, mildew, and mold growth. PERMINATOR also helps reduce radon gas from entering the structure.

RWP002 PRECON

PRECON is a composite sheet membrane comprised of a non-woven fabric, elastomeric membrane, and plasmatic core). The plasmatic core is a seven-layer matrix designed for toughness and provides the lowest water vapor transmission (WVT) rating on the market. Once concrete is poured against PRECON and the concrete cures, a mechanical bond forms that secures the concrete to the membrane.

RWP004 Airshield

Self-adhering air/vapor and liquid moisture barrier is part of a total system to complete the building envelope. It is a roll-type product that is nominally 40 mils thick. The membrane’s controlled thickness is fabricated from cross-laminated polyethylene bonded to specially modified asphalt. This unique, self-adhesive membrane, protected by a special release paper, is strong and durable. It remains flexible when surface mounted and will adhere to most primed surfaces at minimum temperatures of 40° F (4° C). The membrane provides excellent protection as a tough barrier that won’t shrink, sag, dry out, crack, or rot. It offers excellent resistance to punctures during installation. The self-healing characteristics of AIR-SHIELD facilitate recovery if minimal damage is sustained under normal use applications, i.e. when penetrated with self-tapping screws or nails.

RWP004 Airshield LM

AIR-SHIELD LM is a single-component, liquid-applied, water-based, polymer-modified air/vapor and liquid moisture barrier. AIR-SHIELD LM cures to form a tough, seamless, elastomeric membrane, which exhibits excellent resistance to air and moisture transmission.

RWP004 Airshield LMP

AIR-SHIELD LMP is a water-based air/liquid moisture barrier that cures to form a tough, seamless, elastomeric membrane. AIR-SHIELD LMP exhibits excellent resistance to air leakage. When properly applied as a drainage plane, AIR-SHIELD LMP prohibits liquid water intrusion into the substrate.

RWP004 Airshield LSR

AIR-SHIELD LSR (liquid synthetic rubber) is an asphalt-free, single-component, synthetic rubber based liquid air/vapor and liquid moisture barrier. AIR-SHIELD LSR cures to form a tough, seamless, elastomeric membrane, which exhibits excellent resistance to air and moisture transmission.

RWP0055 MEL-DRAIN®

ROLLED MATRIX DRAINAGE SYSTEM
MEL-DRAIN is a dimple-raised, molded polystyrene sheet bonded to high strength polypropylene fabric. This geocomposite allows the passage of moisture through the fabric while preventing fine soils from entering the drainage channel. Various drain designs are available, depending on soil pressure and flow specifications. (An optional polyester backing film is available when used in conjunction with flexible waterproofing material.) The family of MEL-DRAIN products provides excellent protection in vertical, horizontal, and site applications. Used in conjunction with a total W. R. MEADOWS moisture protection system, MEL-DRAIN is the ideal choice for enhanced waterproofing protection of basement walls, plaza decks, earth-sheltered homes, commercial buildings, retaining walls, underground parking, site drainage, etc.

RWP0056 MEL-ROL®

Rolled, Self-Adhering Waterproofing Membrane MEL-ROL waterproofing system is a flexible, versatile, dependable, roll-type waterproofing membrane. It is composed of a nominally 56 mil thick layer of polymeric waterproofing membrane on a heavy duty, four-mil thick, cross-laminated polyethylene carrier film. The two components are laminated together under strict quality-controlled production procedures. MEL-ROL waterproofing system provides a cost-effective answer to properly waterproof foundations, vertical walls, and below-grade floors in residential and commercial construction. It is equally effective for use as between-the-slab waterproofing on plaza decks, parking decks, and structural slabs. Use it as a waterproofing membrane to isolate mechanical and electronic rooms, laboratories, kitchens, and bathrooms. MEL-ROL offers positive protection when “wrapped around” major rapid transit, vehicular, utility, and pedestrian tunnel projects. MEL-ROL can also be used on insulated concrete forms (ICF).

RWP0056 MEL-ROL®LM

MEL-ROL LM (ALL SEASON) is a single-component, polymer-modified, cold-applied, liquid waterproofing membrane ideal for below-grade vertical seamless waterproofing applications. MEL-ROL LM (ALL SEASON) is formulated with the same high quality rubber polymers found in MEADOWS’ successful MEL-ROL “peel and stick” membrane, converting them into a heavy-bodied, high solids, quick drying liquid membrane. The liquid-membrane technology allows faster installation times using either a spray or roller application.

RWP006 FLOOR-TOP STG

FLOOR-TOP STG is a standard traffic-grade, single-component, shrinkage-compensated, self-leveling floor topping and underlayment that may be pumped or poured. FLOOR-TOP STG is specially designed to smooth out uneven, rough or minor deteriorated interior concrete floors.

RWP101 KOOL-ROD™

KOOL-ROD is a closed cell, polyethylene, flexible, rope-like foam joint backing material.This material is virtually non-absorbent and chemically inert to most solvents. KOOL-ROD will not stain or adhere to sealant materials. It is fully compatible with acrylic, butyl, polyurethane, polysulfide, silicone, and most other cold-applied sealant compounds. KOOL-ROD is specifically designed as a compressible backing material to be used in conjunction with a wide variety of cold-applied joint sealants.

RWP130 CEM-KOTE® FLEX CR

Flexible, stable kserovodorodu, cement waterproofing Cem-Kote FLEX CR is a highly flexible, fiber-reinforced material. This two-component system consisting of a dry component and a liquid component B. For additional tensile strength, it can be reinforced with a cloth reinforcing HD. Cem-Kote FLEX CR is used for waterproofing, protection and repair of concrete structures from the effects of hydrogen sulfide in environments such as sewers, manholes, pump stations, and cookers. It is widely used in the field of protection and waterproofing of concrete sewage treatment plants and concrete structures exposed to various chemicals.

RWP130 CEM-KOTE® FLEX ST

CEM-KOTE FLEX ST is a highly flexible, fiber-reinforced, breathable, cementitious slurry, consisting of dry Component A and liquid Component B.

RWP130RFHD REINFORCING FABRIC HD®

REINFORCING FABRIC HD is made of a high quality polymeric fiber with superior durability, resistance to Portland cement, and UV resistance

RWP179 Pourthane NS

POURTHANE NS is an elastic, low-modulus, one-component, moisture-curing, non-sag, polyurethane sealant. It maintains flexibility and waterproofing joint sealing with high bond strength and provides outstanding durability in the civil and industrial construction markets. The product requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.

RWP179 POURTHANE® SL

Standard-Grade, Self-Leveling Topping/Underlayment FLOOR-TOP STG is a standard traffic-grade, single-component, shrinkage-compensated, self-leveling floor topping and underlayment that may be pumped or poured. FLOOR-TOP STG is specially designed to smooth out uneven, rough or deteriorated interior concrete floors. This product is ideal for smoothing out and leveling concrete and rigid-based interior substrates prior to the application of a flooring system or coating. FLOOR-TOP STG cures to a hard, traffic-wearing surface suitable for foot and light rubber-wheeled traffic. FLOOR-TOP STG may be color enhanced with integral color, dyes, coatings, sealers, or acid stains.

RWP560 HRM 714

HRM 714 hot-applied rubberized asphalt waterproofing membrane is a 100% solids blend of asphalts, synthetic rubber polymers, and filler formulated to provide toughness with flexibility and low moisture vapor permeance.